9 in stock
Usually Delivered in 3-7 days (Domestic)
These blades are compatible with any 18mm "Snap off" style tool or handle, as well as the BevAll Breakoff. They off a smoother cut in materials like EVA foam and will keep an edge longer than a steel blade if treated well.
These blades are Scored similar to standard "Breakoff" Blades.
NOTE: These are significantly more brittle than normal metal snap-off blades. Do not try to make unsupported angles or beveled cuts using these blades. Always use eye protection when using these blades as they are prone to shattering.
This package includes 10 Ceramic (UNSCORED) Blades
Material:Cubic Zirconia
These blades are compatible with any 18mm "Snap off" style tool or handle, as well as the BevAll Breakoff. They off a smoother cut in materials like EVA foam and will keep an edge longer than a steel blade if treated well.
NOTE: These are significantly more brittle than normal metal snap-off blades. Do not try to make unsupported angles or beveled cuts using these blades. Always use eye protection when using these blades as they are prone to shattering.
This package includes 10 Ceramic (UNSCORED) Blades
7 in stock
Usually Delivered in 3-7 days (Domestic)
Coated to minimize resistance
Up to 25% sharper than standard blades
Premium Japanese tool steel
Eight (8) segments per blade
Fits most 18mm snap knives
Increase the Speed of Your Cuts with Non-Stick Blades
Cut sharper and faster when you choose OLFA 18mm Ultra-Sharp Black Speed Blades. These blades help you tackle any cutting project with sharpness and speed. Crafted from premium Japanese carbon tool steel for durability. These dual-honed black blades are 25% sharper than standard silver blades. A special non-stick coating reduces resistance. This creates an ultra-sharp blade with up to two times faster cutting. Great for dense materials such as foam insulation board, ceiling tile, cardboard, and more.Each blade includes eight (8) snap-off segments for volume cutting. Each scored section snaps with ease to reveal a new edge. Cut sharp, fast, and efficient with OLFA Ultra-Sharp Black Speed Blades.The universal design of this blade allows for use in most 18mm knives.
3 in stock
Usually Delivered in 3-7 days (Domestic)
Introducing our one of a kind straight handle Midnight Edition 45mm Rotary Cutter. Each cutter comes with one blade and is packed in a reusable felt bag, eliminating unnecessary blister/plastic packaging.
Material
Our brand new Midnight Edition black rotary blade, made from the same metal and process we use to make our Midnight Edition Fabric Shears.
Design
This 45mm rotary cutter features a lightweight, straight handle with a quick push-to-release button. It measures 7.5" from top to bottom.
Blade Durability
This can vary from person to person and how one uses their cutter, as well as the type of cutting mat they have. We tested our blades at various fabric shops in Toronto, and after using them for up to 8 hours a day, five to seven days a week, each shop got between 3 - 4 months of use from one blade!
Recommended Use
They can cut through multiple layers of fabric, leather, fleece, vinyl, denim, and other dense materials.
This cutter is ambidextrous and can be used in either the right or left hand.
14 in stock
Usually Delivered in 3-7 days (Domestic)
This Airbrush kit contains one TM100 Airbrush Compressor, a Single Action 318 Airbrush, an additional battery, a charging cable, an air hose, and an airbrush cleaning kit
The BevAll™ Breakoff (Patent Pending) is a tool that will accept any 18mm breakoff blades that are found in utility style snapoff knives. It allows you to set 15 degree increment angles (On both the left and right side) to cut consistent bevels in many materials.
Angle Settings (with Vertical at 0°): -60°, -45°-, -30°, -15°, 0 °, 15°, 30°, 45°, 60°
These work great alongside a ruler like this one!(Affiliate Link)
Blade Not Included.
Durability: Very durable. Breaking one by hand is difficult. Driving over it with a car will do it.
Recommended age: Best for users age 15 and up.
DISCLAIMER: By purchasing and using this product, you acknowledge and agree that you assume all risks and liabilities associated with its use. ROCKET PROPS LLC assumes no responsibility or liability for any injuries, damages, or losses that may occur as a result of using this product. This product is intended for use as a hobby knife and blade holder. It is your responsibility to use the product safely and according to its intended purpose. Please exercise caution when using this product, and follow all instructions and warnings provided with any compatible blades or products. In the event that you are injured while using this product, you agree to release the manufacturer and seller from any and all liability, claims, or damages that may arise.
The BevAll™ (Patent Pending) is a tool that will accept any 8mm hobby knife handle and blades, such as no name, Excel, and Exacto. It allows you to set 15 degree increment angles (On both the left and right side) to cut consistent bevels in many materials.
This BevAll™ is made of Black Nylon using MJf 3D printing. It is extremely durable.
These work great alongside a ruler like this one! (Affiliate Link)
Blade and Handle Not Included
As these are manufactured in batches, please allow up to 3 weeks to receive your product.
DISCLAIMER: By purchasing and using this product, you acknowledge and agree that you assume all risks and liabilities associated with its use. ROCKET PROPS LLC assumes no responsibility or liability for any injuries, damages, or losses that may occur as a result of using this product. This product is intended for use as a hobby knife and blade holder. It is your responsibility to use the product safely and according to its intended purpose. Please exercise caution when using this product, and follow all instructions and warnings provided with any compatible blades or products. In the event that you are injured while using this product, you agree to release the manufacturer and seller from any and all liability, claims, or damages that may arise.
The BevAll™ Utility is a tool that will accept any standard Box Cutter style Utility blade (The trapezoidal shaped blades, as well as standard rectangular razor blades!)
It allows you to set 15 degree increment angles to cut consistent bevels in a variety of hard and soft materials.
The blade can be stored safely inside the device when not in use.
This BevAll™ Utility is made of a strong Nylon PA12 in BLACK using MJF 3D printing.
These work great alongside a ruler like this one! (Affiliate Link)
Blade Not Included
DISCLAIMER: By purchasing and using this product, you acknowledge and agree that you assume all risks and liabilities associated with its use. ROCKET PROPS LLC assumes no responsibility or liability for any injuries, damages, or losses that may occur as a result of using this product. This product is intended for use as a hobby knife and blade holder. It is your responsibility to use the product safely and according to its intended purpose. Please exercise caution when using this product, and follow all instructions and warnings provided with any compatible blades or products. In the event that you are injured while using this product, you agree to release the manufacturer and seller from any and all liability, claims, or damages that may arise.
The Big BevAll™ (Patent Pending) is a tool that will accept any 10mm-13mm hobby knife handle and blades, often called “#2” Handles. It allows you to set 15 degree increment angles to cut consistent bevels in many materials. - Blade and handle not Included
Product Recieved may vary in color and appearance, but function will not change.
The BevAll™ is 3D Printed in gray Nylon PA12 using MJF 3D Printing.
Blade and handle are not included.
These work great alongside a ruler like this one! (Affiliate Link)
Current Processing time is around 1 week.
DISCLAIMER: By purchasing and using this product, you acknowledge and agree that you assume all risks and liabilities associated with its use. ROCKET PROPS LLC assumes no responsibility or liability for any injuries, damages, or losses that may occur as a result of using this product. This product is intended for use as a hobby knife and blade holder. It is your responsibility to use the product safely and according to its intended purpose. Please exercise caution when using this product, and follow all instructions and warnings provided with any compatible blades or products. In the event that you are injured while using this product, you agree to release the manufacturer and seller from any and all liability, claims, or damages that may arise.
7 in stock
Usually Delivered in 3-7 days (Domestic)
This bundle contains all products listed below, enough to get you started with the BevAll™ Breakoff!
BevAll Breakoff
Folding Sharpener
Olfa 18mm Speedblade Breakoff Blades (Eye Protection Required During Use!)
FOAM-CURE™ is a silicone based adhesive that works very well on EPP and EPO foams. It is crystal clear and cures to a more flexible consistency than CA. It is, however, not instant bonding like CA and there is no accelerator to speed it’s curing. To obtain a faster initial bond when bonding two pieces, FOAM-CURE™ can be applied to one piece and after the two are joined, they can then be pulled apart. After letting it air dry for about ten minutes, FOAM-CURE™ will act like a contact cement when the parts are rejoined, resulting in enough tack strength to allow the next steps of assembly. Full strength is reached in 10-12 hours.
FOAM-CURE™ works with all foams, and will actually bond most other materials. It will bond wood and plastic to foam, and is a good canopy glue. FOAM-CURE™ does not, however, cure flexible enough to act as a hinge for aircraft control surfaces. Its limitations occur when bonding large areas of two non-porous materials. FOAM-CURE™ requires exposure to air for drying. If one tried to bond, for example, a half-dollar coin to glass, over 90% of the adhesive would never cure, since the solvent it contains would have no where to evaporate. A small amount of denatured alcohol can be mixed into the Foam-Cure to make it thinner.
https://bsi-inc.com/hobby/foam_cure.html
14 in stock
Usually Delivered in 3-7 days (Domestic)
IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber and other advanced materials. For model use, IC-2000™ is ideal for the bonding of bulkheads, formers and servo rails to the inside of fiberglass hulls and fuselages. Setup time is 20-40 seconds, which can be accelerated with INSTA-SET™. When cured, IC-2000™ is pliable enough to be carved with a hobby knife. IC-2000™ is the best adhesive for R/C car tires.
IC-2000™ has found many uses in industrial applications, such as rubber to rubber bonding by Beechcraft, carbon composite bonding by Boeing, rubber door seals by Volkswagen, speaker and subwoofer assembly in the audio industry and many others that need the most durable, shock resistant fast bonding adhesive that is available
SDS can be found at https://bsi-inc.com/hobby/ic_2000.html
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.SDS can be found at https://bsi-inc.com/hobby/insta_cure_plus.html
Cornelius Quiring x LDH Scissors: Midnight Edition Gift Set
Introducing a limited edition collaboration with Cornelius Quiring! Each tool in the set is crafted with precision and our signature black Midnight Edition finish, making it the perfect gift for the beginner or experienced sewist alike! This gift set also debuts our newly enhanced Midnight Edition Fabric Shears, forged from carbon steel infused with manganese for improved blade strength and durability.
With this gift set you also enjoy a 10% discount off the combined retail value of the tools; access to one of Cornelius' courses is included for free!
Included in the Gift Set:
9" Midnight Edition Fabric Shears – Our best-selling shears, now forged from carbon steel infused with manganese. They're designed for effortless cutting through all types of fabric.
9" Midnight Edition Pinking Shears – Ideal for creating clean, zigzag edges to prevent fraying.
Midnight Edition Thread Snips – Perfect for precise thread cutting and quick fabric trimming.
Midnight Edition Scissor Sheath – A leather cover that will keep your scissors safe.
Free Access to Your Choice of One of Cornelius' Online Drafting Courses – visit learn.cornelius.ooo to learn more about his courses.
Cornelius' Autograph – Every gift set comes with a card personally signed by Cornelius.
*Please note the scissors in this gift set are right-handed.
10 in stock
Usually Delivered in 3-7 days (Domestic)
This kit contains one Single Action 116 airbush, one TM100 Airbrush Compressor, an additional battery, a charging cable, an air hose, and an airbrush cleaning kit
7 in stock
Usually Delivered in 3-7 days (Domestic)
"Departure" Tool Combo SetThe right tool for a voyage into the unknownPremium Craftsmanship | One Stop Supply | Custom Storage Case | Quick and EasySeparating Parts from SprueEntry Level Single Blade NipperHobby knife for part cleaning up'Dawning' Hobby knifeSanding PartsSemi-rigid sanding stick (General Purpose)Carbon Fiber sanding pad + reusable self-adhesive sandpapers (flat surface)Sponge Sandpapers (Curved surface)Glass polishing file (for clear parts)Fine ManipulationsStraight / Angled tweezers for picking up decals or small partsPanel line accentuatingPhoenix plume panel line markerSeparating Misaligned partsModel Parts SeparatorPrecautionsDo NOT let children under 14 years of age touch this package to avoid bodily injuryDo NOT tap or drop products in this set to prevent possible damage or malfunctionKeep out of corrosive liquids, which may cause damage or malfunctionStore properly after use and keep out of reach of children
3 in stock
Usually Delivered in 3-7 days (Domestic)
This is the latest version of Dspiae's fabled nipper. The 3.0 version utilizes a new generation of manufacturing techniques to give a sharper cut and better finish to the final tool.
These nippers will give you a near GodHand-like cut at a fraction of the cost, and with increased durability compared to the God Hand.
See this review for a comparison.
This racerback tank is soft, lightweight, and form-fitting with a flattering cut and raw edge seams for an edgy touch.
• 50% polyester, 25% combed ring-spun cotton, 25% rayon
• Fabric weight: 4.2 oz/yd² (142 g/m²)
• 32 singles
• Fabric is laundered to reduce shrinkage
• Raw edge seams
• Blank product sourced from Haiti or Nicaragua
This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!
Flexi Filler is a versatile product designed to fill unsightly seam lines and add texture to your cosplay costumes and props. It is easy to use - simply fill the seams or damaged parts with Flexi Filler using your finger or a spreader, smooth out with water, and let it dry fully. The filler is highly flexible, durable, and has a non-cracking formula, making it perfect for cosplay costumes and props that require a high level of flexibility. It is also non-toxic and latex-free, making it safe to use. Once dried, you can wet sand the filler for a smooth, flexible finish. Flexi Filler does not require any top coats and has a matte appearance when dry. Please note that Flexi Filler should not be used as a surface coat where flexibility and impact durability is required. Check out our tutorial video for more information on how to use Flexi Filler.
This small, portable diamond sharpening stone folds up to fit in your toolbox! With 600 grit on one side and 1000 grit on the other, it is a perfect addition to any crafter or cosplayer’s workbench.
